ST Single Phase Alternator Suppliers
2. Cooling air temperature: 258~313K 3. Relative air humidity: not exceed 90%.
ST Series Single Phase Alternator ST Series Single Phase Alternator,Single Phase AC Generator,Single Phase Ac Dynamo,240 Volt Alternator FUZHOU LANDTOP CO., LTD , https://www.landtopcos.com
K series: Pneumatic ball vibrator
GT series: Pneumatic turbine vibrator
R series: Pneumatic roller vibrator
SK series: Impact air hammer
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
Feature:
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
4)Compact size
Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminium section and the hard coated
End plates enables the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test contitions.
Design:
The vibration is produced by the centrifugalforce of the postive and negative unbalance moments in the rotor, the rotor is supported on two heavey duty, prelubricated, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-andleft-hand threads and self-locking.
Technical Parameters
Type
Frequency(V.P.M)
Vibration Power(N)
Air consumption(/min)
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
GT-10
27.500
35.000
37.500
0.840
1.390
2.400
46
80
112
GT-13
26.000
30.000
33.000
1.400
2.440
3.730
120
200
290
GT-16
17.000
21.500
24.000
1.220
2.090
3.160
120
200
290
GT-20
17.000
20.000
23.000
2.170
4.040
5.520
185
325
455
GT-25
12.000
15.500
17.000
2.120
3.510
5.070
185
325
455
GT-32
13.000
14.000
16.000
3.380
5.430
7.540
330
530
745
GT-36
7.800
10.000
13.000
3.300
5.000
7.150
330
530
745
GT-40
7.500
8.800
9.500
4.350
7.350
9.850
408
428
680
GT-48
5.800
7.500
9.700
4.950
7.750
10.6007
408
428
680
GT-60
4.758
6.530
8.515
5.700
9.800
11.150
505
600
920
Â
We have the following types:
K series: Pneumatic ball vibrator
GT series: Pneumatic turbine vibrator
R series: Pneumatic roller vibrator
SK series: Impact air hammer
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
Feature:
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
4)Compact size
Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminium section and the hard coated
End plates enables the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test contitions.
Design:
The vibration is produced by the centrifugalforce of the postive and negative unbalance moments in the rotor, the rotor is supported on two heavey duty, prelubricated, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-andleft-hand threads and self-locking.
Technical Parameters
Type
Frequency(V.P.M)
Vibration Power(N)
Air consumption(/min)
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
GT-10
27.500
35.000
37.500
0.840
1.390
2.400
46
80
112
GT-13
26.000
30.000
33.000
1.400
2.440
3.730
120
200
290
GT-16
17.000
21.500
24.000
1.220
2.090
3.160
120
200
290
GT-20
17.000
20.000
23.000
2.170
4.040
5.520
185
325
455
GT-25
12.000
15.500
17.000
2.120
3.510
5.070
185
325
455
GT-32
13.000
14.000
16.000
3.380
5.430
7.540
330
530
745
GT-36
7.800
10.000
13.000
3.300
5.000
7.150
330
530
745
GT-40
7.500
8.800
9.500
4.350
7.350
9.850
408
428
680
GT-48
5.800
7.500
9.700
4.950
7.750
10.6007
408
428
680
GT-60
4.758
6.530
8.515
5.700
9.800
11.150
505
600
920
Â
The construction of the generators is of drip-proof, salient pole rotating field self excitation and constant voltage type. The alternator interior is used with high quality electric magnetic and Electric materials. Stator insulation is class B. These generators are elegant in appearance, tight in construction and easy maintenance. IEC standard are adopted on dimension, these dimension are suitable for using in Australia, Europe, America and other countries with the end covers to be model B.
The alternators are of harmonic wave self-exciation constant voltage system and automatic voltage control excitation constant voltage system, both of them have Excellent dynamic performance, convenient and reliable in operation. These generators are excellent in appearance and easy to maintain. Dimensions are adopted according to I.E.C Standards.
The voltage of the alternator is 230V of 115V, the frequency is 50Hz. Its operation mode is of continuous duty. It can provide 60Hz and the other voltage's generator according to necessary.
The alternator can be coupled with a prime mover directly or through a V-belt, with 5% change of speed of the prime mover under load Variation of 0~100%, at a voltage of 230V or 115V, 50Hz or 60Hz to get a satisfactory constant voltage performance.
Operating Condiyions:
1. Altitude: not exceed 1000m.
Gt-36 Series Pneumatic Gear Vibrator
Model NO.: GT-36
Trademark: SMT
Specification: PP Bag + Box +Carton
Origin: China
HS Code: 8479899990
Model NO.: GT-36
Trademark: SMT
Specification: PP Bag + Box +Carton
Origin: China
HS Code: 8479899990
We have the following types: