1. Every spindle can make bigger power. 2. Electric pumping oil to lubricate working table.
For keeping the food safety, there is a very strick hygiene standard for poultry processing plant , especially the employee's personal health management, and hygiene control.
First: Have to establish employee's personal health records for HR department.
Second: personal hygiene control
11 Staff changed clothes is leave in locker room, not allow enter the the processing room without working clothes; or not allowed wear working clothes go outside, pocket and other personal items are stored in locaker room.
13, non production personnel (ie inspection, management personnel, etc.) and all other people non equivalent to the production is not allowed goes into the workshop
Hygiene Equipment, Hygienical Equipment, Hygiene Machine,Sanitary Equipment, Sanitary Machine Connect Group For Poultry Project , http://www.connectpoultry.com5 Spindles Four Sided Wood Planer
PRODUCT DISCRIPTION
Model
HC620
HC520
Max Working Width
20-200mm
20-200mm
Max Working Thickness
8-125mm
8-125mm
Min. Working Length
250/590mm
250/630mm
Feeding Speed
8-33m/min
8-33m/min
Spindle Diameter
40mm
40mm
Bottom Spindle Speed
6800r/min
6800r/min
Cutter Diameter
1st Bottom Cutter
125mm
125mm
Left And Right Cutter
108-200mm
108-200mm
1st Upper Cutter
108-180mm
108-180mm
2nd Upper Cutter
108-180mm
/
2nd Bottom Cutter
108-200mm
108-200mm
Machine Power
1st Bottom Spindle
5.5kw
5.5kw
Right Spindle
5.5kw
5.5kw
Left Spindle
5.5kw
5.5kw
1st Upper Spindle
7.5kw
7.5kw
2nd Upper Spindle
5.5kw
/
2nd Bottom Spindle
5.5kw
5.5kw
Feeding Power
4kw
4kw
Lifting Power
0.75kw
0.75kw
Total Power
39.75kw
34.25kw
Voltage
380v 50hz 3phase
Dust Collection Port
120mm*6pc
120mm*5pc
Machine Size
4000*1780*1750mm
3500*1780*1750mm
Machine Weight
4400KG
3600KG
Optional Function:
3. Every spindle adopts brake system.  4. Every spindle motor starts by Y Delta.
5. Out-feeding table.Â
PRODUCT DETAILS
Machine Specification:
1. This machine adopts an overall casting body, which has stable performance and high rigidity.
2. Fully-enclosed safety cover and door opening protection, low noise, safety and environmental protection.
3. The main shaft is precision-machined, balanced, and assembled accurately, and its operation is stable and precision is good.
4. The working table surface adopts special materials and special heat treatment, hard chrome plating, wear-resistance.
5. Feeding system front and middle and rear use three cylinder press, stable pressure, easy adjustment.
6. All the cutter shafts are driven individually, cutting strong and powerful.
7. Feeding belt adopts stepless transmission and universal joint transmission, stable and reliable, easy to operate.
8. All electrical components and transmission components adopt imported components from international brands, and their performance is stable.
DELIVERY&PACKAGE:
Generally we will take care of your machine packages well.
Firstly our worker will make sure your machine clean before package, then add Stretchy film for the whole machine and spare parts for sweet protection, at last we will make export standard strong plywood case package according to your needs.
Why Choose Us:
1. We have our own woodworking machinery factory.
2. As a professional manufacturer, we have 14 years factory experience for woodworking machinery.
3.Our products are widely sold in made-in-china.
4. More and more customers in the world are using our machine, we received many good feedbacks or reviews from lots of countries.
5.We have perfect after-sales service.
  a. Machine guarantees 12 months.(The host machine warranty for one year, the wearing parts is no guarantee, but support will be provided)
  b. 24 hours technical service by email or calling.
  c. English manual and operation video.Â
  d. Engineers available to service machine overseas, also welcome to our factory to learn the installation and use of the machines.
  e. Regularly follow-up by email or cellphone
  f. Expanding your production or upgrading machine in the future, professional solution will be provided.Â
6. We are looking for Good customers like you! and Distributor or Agents Wanted!!!Â
   Learn more about us on SNS
1, according to the training plan for employees of personal hygiene and food safety education and training, new factory staff should focus on systematic training, the assessment of qualified, can mount guard. Training and assessment results should be recorded.
2, employees should develop good personal hygiene habits, do wash hands frequently, and frequently cut nails, take a bath, change clothes frequently, often barber, do not spit everywhere, litter.
3, staff work, unified the trousers, it is forbidden to wear slippers, sandals and other types of open toe shoes; prohibit lipstick, makeup, perfume, nail polish, wearing any jewelry, watches etc.;
4. Smoking, eating, playing, running or chasing slapstick are forbidden in the production area.
5, Staff enter the workshop may not bring anything which nothing to do with the production of goods, first changing shoes, changing overalls, wearing a work cap, work clothes, hats should be dressed neatly, hair must not be exposed outside the coat.
6, Staff hand should be kept clean, and before entering the processing site, after the toilet or hand pollution,washing hand immediately.
6.1 Hand washing disinfection procedures:
A: rinse, rinse with water to scrub, washing hand with liquid disinfectant soak for 20 seconds, rinse and drying
B: rinse, liquid soap scrub, rinse, spray drying, 75% alcohol scrub disinfection
Note: short sleeved overalls should be washed to the elbow
6.2 Employee hands should be kept clean and must be cleaned and disinfected during the production process:
A: after going to the bathroom;
B; after disposing of waste;
C: return to work prior to leaving the work area or having nothing to do with production;
D: before touching the product;
E: after touching other parts of the body that are not clean or unclean;
F: enter workshop and work continuously for 2 hours before start;
G: employees who have direct contact with food must wash hands and disinfect every 1 hours.
7, before entering the workshop, the bottom of shoes and shoes should be soaked and disinfected in the shoes disinfectant pad before entering the workshop.
8, The supervisor inspect labors in the process : hat, masks, shoe wearing, wearing is according to the specification, the hair is exposed; whether the hand hygiene compliance, the nail should not exceed 0.5mm long; if anyone injured posts are sick posts and so on.
9, the production process of contact with the finished products must wear disposable gloves, gloves should be intact, no damage, impermeable, after hand contaminated, must wash hands disinfection procedures according to the above-mentioned re wash hands. In the work process, packaging personnel must be every 2 hours with 75% alcohol disinfection products and processing the opponent; personnel due to operational reasons, contact exposed of the finished product, every 1 hours with 75% alcohol disinfector.
10, During the production period is not allowed to answer the phone (supervisor, foreman, except) where there is a special need to consult their superiors, call replying have to be outside of production area, after reply the call, the first thing is wash hand before back to work.
Personal clothing and goods
12, Wash and disinfect hands after going to the bathroom, with working clothes, hats, shoes is not allowed goes into bathroom, all must change before and after.
Employee health requirements
1, employees should participate in the annual health examination, inspection qualified to post. Prohibited examination without appointment. Persons suffering from dysentery, typhoid, hepatitis and other infectious diseases of the digestive tract (including pathogen carriers), active tuberculosis, suppurative or exudative skin disease and other disease incompatible with food hygiene, found an immediate dismissal or discouraging.
2, people suffering from respiratory diseases (such as colds, cough), minor can wear masks, but not in direct contact with food; in severe cases, the supervisor or leader to arrange the rest, heal before returning to work.
3, If staff hand's wound , only after dressing wearing disposable gloves can be arranged in direct contact with food; if the wound is deep, the supervisor or leader have to arrange him rest, and heal before returning to work.
5 Spindles Four Sided Wood Planer
Model NO.: HC520
Cutter Shaft: 5
Spindle Speed: >5000rpm
Process Type: Heavy Processing
Certification: CE, ISO
Name: Four Side Planer
Working Thickness: 8-125mm
Feeding Speed: 8-33m/Min
Spindle Diameter: 40mm
Total Power: 34.25kw
Weight: 3600kg
Dust Port Diameter: 120mm*5PC
Dimension: 3500*1780*1750mm
Website: Www.Hicasmachinery.COM
Trademark: HICAS
Transport Package: Standard Packing or Packing According to Customer
Specification: 3500*1780*1750mm
Origin: Qingdao
HS Code: 84659500
SAMPLE: