Oil Suction Filter,Oil Absorbing Filter,Oil Filtration Device,Oil Removal Filter HUAIAN YATAI HYDRAULIC MACHINERY CO., LTD , https://www.yataihydraulic.com
please check below machine pictures for your reference:
Material : Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â PVC (polyvinyl chloride)
Pipe size range:             Ø16~32mm
Operating direction: Â Â Â Â Â Â Â Â Â Â from right to left
Center height: Â Â Â Â Â Â Â Â Â Â Â Â Â 1000 mm
Machine color: Â Â Â Â Â Â Â Â Â Â Â Â Â Xinrong standard color (white)
Cooling water consumption:        8 m3/h  ( ≤20ºC,≥0.3MPa )  Â
Tank volume: Â Â Â Â Â Â Â Â Â Â Â 12 m3Â
Compressed air consumption: Â Â Â Â 0.5 m3/min ( >0.5MPa )
Total power: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 165kW
Actual power when operating:Â Â Â Â Â Â 100kW
Overall dimension:            31000×3000×3000 mm
Control system: Â Â Â Â Â Â Â Â Â Â Â Â RKC temperature controller, JapanÂ
DC speed regulator: Â Â Â Â Â Â Â Â Â Â Eurotherm, U.KÂ
Inverter: Â Â Â Â Â Â Â Â Â Â Â ABB or BOSCH-REXROTH
Low voltage electrical parts   Â
Button, switch          Schneider, FranceÂ
Contactor            Schneider, France
Air switch            Schneider, FranceÂ
Intermediate relay        Schneider, France
Temperature controller       RKC, Japan
Heater              magal alloy ceramic heater
l   Circumstance:Â
Working place: Â Â Â Â Â Â Â Â indoors
Power supply: Â Â Â Â Â Â Â Â Â no dangerous area
Temperature:          0-40ºC
Humidity: Â Â Â Â Â Â Â Â Â Â Â 85% no condensation
Vaulted cover, no distortion. National patent for principal axis airproof device.Â
Self-friction or electric heating and steam heating function of the hot mixing.
•   Total capacity:            200/500 L
•   Effective capacity:           150/320 L
•   Vane rotation speed:          475/950/130 rpm
•   Motor heating power:          30/42/11 KW
•   Water consumption:          4 t/h
•   Heating method:            self-friction or electric heating
•   Discharge method:           pneumatic or manual
•   Dimension (L×W×H):          3000×1500×2000 mm
•   Mixing time:              10-12 min/pot
•   Cooling time:             10-12 min/pot
•   Screw, barrel:              38CrMoAlA, nitriding and polishing,                                  depth of nitriding: 0.45-0.65mm,                                     surface hardness HV800-900;                                     with vacuum exhaust device,                                       vacuum exhausting power: 2.2 kW
•   Sensor:              PT131B, 50MPa; power 24V, output 0-10VÂ
•   Screw diameter:          65/132 mm
•   Screw rotation direction:        different direction outwardly
•   Drive motor power:            37 kW, AC motor
•   Inverter                 ABB or BOSCH-REXROTH
•   Quantitive feeding motor:       0.75 kW (AC motor )
•   Capacity Max:             ≈250 kg/h (PVC material, vary with different                            recipe and pipe size)
•   Vertical gearbox:             high torque, low noise, hard gear face                                 special gearbox for extruder;                                        Material of box: HT200 with tempering;                               Material of gear: 20GrMnTi with                                     carburizing ,quenching and grinding
•   Lubrication system:           circulating oil enforced by oil pump; infiltration                            and splash in oil basin
•   Barrel heating power:          21.4 kW
•   Barrel cooling power:          3×0.25 kW  enforced air cooling
Features:
   Four strand design can produce four pipes at one time which can increase efficiency greatly.
   Technical parameter
   Die material:              40Cr, forgings with tempering treatment
   Bolt grade:               12.9 grade high strength bolt
   Flow channel surface:        chroming and mirror polishing
   Pipe range:           Ø16~32mm
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                            Â
•   Center height:          1000 mm
•   Tank material:           stainless steel
•   Tank length:           4000 mm
•   Vacuum degree:          0~0.06MPa (adjustable)
•   Vacuum pump:          2.2 kW Â
•   Water pump:           3.0 kW
•   Moving motor:           0.75 kW
•   Cooling method:            immersion
•   Adjust range of forward and backward:        ±400 mm
•   Adjust range of up and down:           ±50 mm
•   Adjust range of left and right:             ±50 mm
Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
       Technical parameter                         Â
•   Quantity of belts:            8pcs
•   Effective length:         1000 mm
•   Max. Hauling force:        6000 N.m
•   Hauling speed:          1-10 m/min
•   Clamping type:          pneumaticÂ
•   Hauling motor:           4×0.55 kWÂ
•   Control method:          ABB or BOSCH-REXROTH
       For cutting part
       Technical parameter                           Â
•   Cutting type:            knife cutting
•   Clamping type:           pneumatic
•   Workbench moving method:      pneumatic
•   Cutting range:           Ø16~32mm
•   Cutting motor:              4×0.25 kW
•   Control method:            Siemens PLC controller 
•   Motor power:            4kW
•   Feeding port size:         240× 350mm
•   Rotor diameter:            Ø200mm
•   Rotating speed:            650rpm
•   Rotating blades:            3pcs
•   Fixed blades:            2pcs
•   Blade material:            Cr12MoV
•   Protection:               overload emergency stop
•   Crushed material size:       <=8mm
•   Capacity:               50-100kg/h
we can show you machine running anytime. Welcome to our factory for visiting.Â
Besides, i can send some machine running vidoes for your reference.
please check below machine pictures for your reference:
Material : Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â PVC (polyvinyl chloride)
Pipe size range:             Ø16~32mm
Operating direction: Â Â Â Â Â Â Â Â Â Â from right to left
Center height: Â Â Â Â Â Â Â Â Â Â Â Â Â 1000 mm
Machine color: Â Â Â Â Â Â Â Â Â Â Â Â Â Xinrong standard color (white)
Cooling water consumption:        8 m3/h  ( ≤20ºC,≥0.3MPa )  Â
Tank volume: Â Â Â Â Â Â Â Â Â Â Â 12 m3Â
Compressed air consumption: Â Â Â Â 0.5 m3/min ( >0.5MPa )
Total power: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 165kW
Actual power when operating:Â Â Â Â Â Â 100kW
Overall dimension:            31000×3000×3000 mm
Control system: Â Â Â Â Â Â Â Â Â Â Â Â RKC temperature controller, JapanÂ
DC speed regulator: Â Â Â Â Â Â Â Â Â Â Eurotherm, U.KÂ
Inverter: Â Â Â Â Â Â Â Â Â Â Â ABB or BOSCH-REXROTH
Low voltage electrical parts   Â
Button, switch          Schneider, FranceÂ
Contactor            Schneider, France
Air switch            Schneider, FranceÂ
Intermediate relay        Schneider, France
Temperature controller       RKC, Japan
Heater              magal alloy ceramic heater
l   Circumstance:Â
Working place: Â Â Â Â Â Â Â Â indoors
Power supply: Â Â Â Â Â Â Â Â Â no dangerous area
Temperature:          0-40ºC
Humidity: Â Â Â Â Â Â Â Â Â Â Â 85% no condensation
Vaulted cover, no distortion. National patent for principal axis airproof device.Â
Self-friction or electric heating and steam heating function of the hot mixing.
•   Total capacity:            200/500 L
•   Effective capacity:           150/320 L
•   Vane rotation speed:          475/950/130 rpm
•   Motor heating power:          30/42/11 KW
•   Water consumption:          4 t/h
•   Heating method:            self-friction or electric heating
•   Discharge method:           pneumatic or manual
•   Dimension (L×W×H):          3000×1500×2000 mm
•   Mixing time:              10-12 min/pot
•   Cooling time:             10-12 min/pot
•   Screw, barrel:              38CrMoAlA, nitriding and polishing,                                  depth of nitriding: 0.45-0.65mm,                                     surface hardness HV800-900;                                     with vacuum exhaust device,                                       vacuum exhausting power: 2.2 kW
•   Sensor:              PT131B, 50MPa; power 24V, output 0-10VÂ
•   Screw diameter:          65/132 mm
•   Screw rotation direction:        different direction outwardly
•   Drive motor power:            37 kW, AC motor
•   Inverter                 ABB or BOSCH-REXROTH
•   Quantitive feeding motor:       0.75 kW (AC motor )
•   Capacity Max:             ≈250 kg/h (PVC material, vary with different                            recipe and pipe size)
•   Vertical gearbox:             high torque, low noise, hard gear face                                 special gearbox for extruder;                                        Material of box: HT200 with tempering;                               Material of gear: 20GrMnTi with                                     carburizing ,quenching and grinding
•   Lubrication system:           circulating oil enforced by oil pump; infiltration                            and splash in oil basin
•   Barrel heating power:          21.4 kW
•   Barrel cooling power:          3×0.25 kW  enforced air cooling
Features:
   Four strand design can produce four pipes at one time which can increase efficiency greatly.
   Technical parameter
   Die material:              40Cr, forgings with tempering treatment
   Bolt grade:               12.9 grade high strength bolt
   Flow channel surface:        chroming and mirror polishing
   Pipe range:           Ø16~32mm
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                            Â
•   Center height:          1000 mm
•   Tank material:           stainless steel
•   Tank length:           4000 mm
•   Vacuum degree:          0~0.06MPa (adjustable)
•   Vacuum pump:          2.2 kW Â
•   Water pump:           3.0 kW
•   Moving motor:           0.75 kW
•   Cooling method:            immersion
•   Adjust range of forward and backward:        ±400 mm
•   Adjust range of up and down:           ±50 mm
•   Adjust range of left and right:             ±50 mm
Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
       Technical parameter                         Â
•   Quantity of belts:            8pcs
•   Effective length:         1000 mm
•   Max. Hauling force:        6000 N.m
•   Hauling speed:          1-10 m/min
•   Clamping type:          pneumaticÂ
•   Hauling motor:           4×0.55 kWÂ
•   Control method:          ABB or BOSCH-REXROTH
       For cutting part
       Technical parameter                           Â
•   Cutting type:            knife cutting
•   Clamping type:           pneumatic
•   Workbench moving method:      pneumatic
•   Cutting range:           Ø16~32mm
•   Cutting motor:              4×0.25 kW
•   Control method:            Siemens PLC controllerÂ
•   Motor power:            4kW
•   Feeding port size:         240× 350mm
•   Rotor diameter:            Ø200mm
•   Rotating speed:            650rpm
•   Rotating blades:            3pcs
•   Fixed blades:            2pcs
•   Blade material:            Cr12MoV
•   Protection:               overload emergency stop
•   Crushed material size:       <=8mm
•   Capacity:               50-100kg/h
we can show you machine running anytime. Welcome to our factory for visiting.Â
Besides, i can send some machine running vidoes for your reference.
16-32 mm PVC Pipe with Four Strand Extrusion Line
Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
16-32 mm PVC pipe with four strand extrusion line
This 16-32 mm PVC pipe with four strand extrusion line four strand PVC pipe extrusion line can produce the pipe size 32mm. this 16-32 mm PVC pipe with four strand extrusion line is with big capacity, it is 4 production lines, can produce 4 pipes at same time. So the capacity is high. The pipe size is: 16-32mm diameter.
16-32 mm PVC pipe with four strand extrusion line
This 16-32 mm PVC pipe with four strand extrusion line four strand PVC pipe extrusion line can produce the pipe size 32mm. this 16-32 mm PVC pipe with four strand extrusion line is with big capacity, it is 4 production lines, can produce 4 pipes at same time. So the capacity is high. The pipe size is: 16-32mm diameter.