12V 70A Car Alternator For Toyota - Dyna Hilux Hiace 1022115600 1022115670


1.Specification :

2.Transaction Term:

3. Part Number

All these OEM name is just for reference

All these OEM brand is just for reference

12V 70A Car Alternator For Toyota - Dyna Hilux Hiace 1022115600 1022115670


1.Specification :

2.Transaction Term:

3. Part Number

All these OEM name is just for reference

All these OEM brand is just for reference

TPU Paint Protect Film

TPU (thermoplastic polyurethane) Paint Protect Film is a revolutionary product that has gained popularity in the automotive industry. It is a clear, self-healing film that is applied to the exterior of a vehicle to protect the paintwork from scratches, chips, and other forms of damage. TPU Paint Protect Film offers a high level of durability and resistance to UV rays, chemicals, and harsh weather conditions. This film is becoming increasingly popular among car enthusiasts and professionals alike, as it not only enhances the appearance of the vehicle but also preserves its resale value.

Installing TPU paint protection film (PPF) can be done with a few simple steps. Here's a guide to help you through the process:

1. Gather the necessary materials: You will need TPU paint protection film, a squeegee, a spray bottle filled with a mixture of water and a few drops of soap, a microfiber cloth, and a heat gun (optional).

2. Prepare the surface: Clean the surface of the car where you will be applying the film. Use a mild cleaning solution and a microfiber cloth to remove any dirt, dust, or debris. Make sure the surface is completely dry before proceeding.

3. Cut the film: Measure and cut the TPU paint protection film to the desired size and shape. It is recommended to leave a few extra inches around the edges for easier installation.

4. Wet the surface: Spray the surface of the car with the water and soap mixture. This will create a slippery surface that allows you to position and adjust the film.

5. Apply the film: Peel off the backing of the TPU film and carefully position it on the wet surface of the car. Start from one edge and slowly work your way across, smoothing out any air bubbles or wrinkles with a squeegee. Use the squeegee to firmly press the film onto the surface, removing any excess water and ensuring a secure bond.

6. Trim the edges: Once the film is applied, use a sharp blade or a precision knife to trim the excess film from the edges. Take your time and make precise cuts to achieve a clean and professional finish.

7. Heat and finalize: If desired, you can use a heat gun to gently warm the film, which helps it conform to the curves and contours of the car. Be careful not to overheat the film, as it may cause damage. After heating, use the squeegee again to ensure the film is securely adhered and free of any air bubbles or imperfections.

8. Let it cure: Allow the TPU paint protection film to cure for at least 24 hours before exposing it to water, extreme temperatures, or any other potential sources of damage.

Self-Repairing TPU Gloss,TPU Matte,TPU Gloss Black,TPU Matte Black,TPU chameleon white,TPU roof

Guangzhou Fuyulai Technology Co.,Ltd , https://www.fylvinyl.com