(1) Pressing the start-up procedure to start and stop, all relevant chain systems should meet the technical requirements; (2) The moving cone rotates in the forward or reverse direction (autobiography) and should not exceed 15 revolutions per minute; (3) The bevel gear should have no impact and periodic noise; (4) The lubrication system works normally. The oil supply pressure should be in the range of 0.5-1.5 kg/cm2, and the return oil temperature should not exceed 50 °C (the load test should not exceed 60 °C). (5) The hydraulic adjustment device of the hydraulic equipment shall be locked according to its operating procedure; the size of the discharge port shall be adjusted to meet the requirements for use. (6) The normal continuous operation time should not be less than 2 hours, generally to meet the identification requirements. The load test has the following requirements: (1) Perform a load check on the items inspected in the no-load test run. (2) Load test time, it is necessary to run normally for two days and nights (allow short-term parking check). The ore should be gradually increased, and the first amount should be fully loaded. (3) The ore position should be installed correctly, and the ore should be evenly distributed in the crushing chamber. (Iv) in the normal crusher crushing process, there should be no sharp vibration and abnormal sound.
Our Plastic Shopping T-Shirt Bag / Vest
Bags could made into various size and colors, and could also print with your
design or LOGO. The material could be HDPE / LDPE Virgin. The bags could
be in clear / White/ Black/ Red/ Green/ blue/Yellow/ Purple and so on. We could
make the bags into most color as shown in the Pantone Book.
Our certificates: ISO 9001:2008, and
BRC
Trust you will like our quality, service
and price.
Tee Shirt Bags,T-Shirt Shopping Bags,Plastic Bags For T-Shirts,Custom T-Shirt Packaging Bags,Thank You Bags,Big Plastic Shopping Bags BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmbillion-plastics.com
What are the requirements for no-load and load test after the cone crusher is overhauled?
The no-load test has the following requirements: