Light range of conveyors is developed to convey grains, seeds, pigments, additives and meal
type of products where material is free flowing and less abrasive environment. Bush chain with bolted UHMWPE paddle is used
to convey materials, which run on bottom plate and return brackets. UHMWPE
bottom and top liners are available on request.
Due to its design and product nature, these conveyors can operate at
high chain speed.
Conveyor casings and bolt holes are cut using CNS
laser machines and folded. These conveyors are specifically designed to reduce
fabrication and assembly duration, which makes them very economical.
Chain conveyors can be designed in a horizontal,
inclined, or in vertical arrangement. Conveyor`s bottom and side panels are
made off 3mm folded galvanized sheets with 2mm top cover. Drive and tail units fitted with flanged
bearing housings with lip seals, Plummer block bearing housing are also
available on request.
Hardened head end and tail sprockets are mounted
with keys.
Conveyor roller chains and standard sprockets are
widely used for these applications.
Tail end comes with adjustable screw take up in
standard design; self-cleaning tail end with screw adjustment on driven is
available for food products.
Grain Chain Conveyor,Rice Drag Chain Conveyor,Light Duty Chain Conveyor,Light Duty Drag Chain Conveyor Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.ycectech.com
After the air in the working room is heated by the electric heater, it is forced to circulate through the fan, and uniform heat exchange is performed with the heated object in the work area so as to achieve the purpose of baking or drying.
Instructions:
1. Open the door, put the items that need heat treatment into the shelf on the box, close the door, and twist the exhaust valve on the control panel to half (the temperature of the dry goods can be used at any time during the heating process. Appropriate adjustments);
2. Switch on the power supply in accordance with the requirements of this equipment, and ground the ground terminal of the power supply socket used.
3, turn on the power switch, power indicator light, temperature control instrument starts to show the temperature of the studio;
4. There are two heating switches. If you need a lower temperature to turn on the heating 1, turn on the heating when it is higher, and then turn on the heating.
5, according to the needs of the heated object, turn the temperature setting knob on the temperature controller (or press the dial switch) to set the temperature, the drying oven starts heating work;
6. After the work is completed, turn off the heating switch 1, the heating switch 2, and the power switch.
The working principle and use method of coal analyzer
working principle: