CNC punching and shearing equipment for the processing of angles studied for small and medium size steel construction companies. These lines provide flexibility and simple use, and are characterized by an innovative infeed roller conveyor system allowing high precision with minimum loss of material.
Advantages:
The linear tool carrier (y-axis) has several stations that hold the punching tools and one cutting tool. Especially for flexibility and efficient processing are setup times a crucial cost factor. Downtimes should be reduced to a minimum. Therefore, recent tool systems are designed for fast and convenient change of punches and dies. They are equipped with a special plug-in system for a quick and easy change of tools.
There is no need to screw anything together. The punch and die plate are adjusted to each other automatically Punches and dies can be changed rapidly meaning less machine downtime
Angle punching round hole and s-lot hole samples
The Punching Unit:
This
unit is consists of three pieces of machine body, two hydraulic pressure
punching cylinders, four die bases with upper and lower dies, and two sets of
servo systems for controlling stadia adjustment. This unit can be installed three
different standards punches on each side. Every punch matches with one gas
cylinder. The gas cylinder piston pole links a padding block, which installed
between punch poles and oil cylinder press head. It automatic chooses punch,
namely choose relevant gas cylinder to drive relevant padding block according
to the order of computer. The position of stadia is located by servo motor,
which drives ball screw to drive die base move up and down, thus to achieve the
requirement of stadia position. It can punch many rows and different diameters
holes on two wings of angle steel.
The Marking Unit:
New design for type marking unit, more stable and longer life
This
unit consists of fix lathe bed, movable lathe bed, hydraulic pressure head,
four positions oil cylinders (can change four positions for character boxes)
and adjusting device. According to the order of computer, to mark on places the
drawings require. For making the mark clear and endurable, and avoiding the
angle steel abrade character heads, it adds oil cylinder of movable lathe bed
uplift and falling. For satisfying the processing scope, it adds manual
adjustment setup, which can change the position of characters to adapt
different standards angle steel.
The Shearing Unit:
This unit consists of frame
machine body, hydraulic pressure dynamic cylinder, upper blade setup, lower blade
setup, and front bracket tank etc. The front bracket tank avoids angle steel to
strike lower blade. The lower blade setup can adjust the clearance according to
angle steel thickness to ensure the cutting quality. It cuts different
standards of angle steel, according to the order of computer.
The Feeding Conveyors:
Double linear guide and detection rack for total
feeding conveyor ensure better accuracy and machine stability. Linear guide
from Taiwan HIWIN.
The NC Feeding Carriage:
NC carriage linear guide cushion, pneumatic lift
Work Table And Overturning Rack:
Overturn
rack for loading material automatically
Angle Punching Marking Shearing Line Angle Punching Marking Shearing Line,Angle Connecting Plate Punching,Punching Shearing And Marking Line,CNC Angle Production Line Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com
* Best exterior construction and good appearance
* Trustable highly precise metrology equipment
* High performance for electronic parts
* High quality explosion-proof motor with strong ability against power fluctuation
* Specially designed filtering systems with build-in re-cleanable filter
* With rich functions expansion like POS for smart card and bank card
* Flexible fuel application for gasoline, diesel, and kerosene etc.
* Works well in harsh conditions, like extremely cold, hot, humid, and sand-stormy environment
Â
Optional Configuration:
Â
Technical specifications:
Accuracy for the unit
±0.25%
Flow rate
45L/min
Ambient temperature
-25ºC~ +55ºC; -40ºC~ +50ºC
Relative humidity
20% - 95%
Unit noise rate
< 70dB (A);
Inlet vacuum rate for  suction pump
>=54kPa
Communication
With RS 485 port, or current loop
Power supply
AC 220V(  -15%~+10%),(50/60±1)Hz;Â
AC 380V( -15%~+10%); (50/60±1)Hz
Digit of sale
7digits (decimal points can be adjusted )
Digit of volume
6digits (decimal points can be adjusted )
Digit of unit price
5digits (decimal points can be adjusted )
Totalizer of sale
0~42949672.95Â
Totalizer of volume
0~42949672.95Â
         SK56ZF424A                    SK56ZF632B
  Model
Product
Nozzle
Display
Package(mm)
Gross weight
SK56Z/G/QF424B
2
4
2
1/side
1318*820*2480
367/397
SK56Z/G/QF632B
3
6
4
2/side
1318*820*2480
427/457
SK56Z/G/QF422B
2
4
2
1/side
1318*820*2480
367/397/315
SK56Z/G/QF632B
        3
6
2
1/side
1318*820*2480
427/329
SK56Z/G/QF842B
4
8
2
1/side
1318*820*2480
 Z :  Vane pump  G: Gear pump Q: Submersible pump 
About Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.
SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.
All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.
With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China
.
Â
Newest NC carriage, linear guide drive, accuracy
and stability much better!
Sanki Fuel Dispenser Fuel Pump Sk56 Series Submersible with 4-8 Nozzles
Model NO.: SK56
Power Supply: AC 220V( -15%~+10%), (50/60)Hz; AC 380V( -15%~
Trademark: SANKI
Transport Package: Carton
Specification: 1318*820*2480
Origin: Beijing China
HS Code: 8413110000
Features: