Beams are an essential component of a Warp Knitting Machine. They are cylindrical rollers that hold the warp yarns in place and feed them into the machine. The beams are typically made of aluminum or steel and come in various sizes and configurations depending on the type of warp knitting machine and the specific application. Beams For Warp Knitting,Forged Warp Knitted Beam,Casted Warp Knitted Beam,Beam Flange Diameter suzhou cotex international Co.,Ltd , https://www.cotexmill.com
Graphite Sheet Reinforced with tanged metal insert is made from SUNWELL B201 Flexible graphite sheet through specially pressing or sticking process. The insert materials can be SS304, SS316, Nickel, etc. It used in kinds of conditions, and various gaskets.Â
         Â
Description
> Made for various gaskets
> Suitable for petrochemical, mining, vessels, boilers, piping and duct, pumps and valves, flanges
Prime Features
> Lone life and less maintenance
> Replacement for asbestos, new more applications are being indentified daily.
> Excellent comprehensive properties
> Good compressibility and resilience, small stress relaxation, fine compensation function
> Permanently elastic, even in hot-cold cycles over the entire temperature range, no aging, no brittleness, no hot or cold flow.
Technical Data
Item
Industrial grade
Unclear grade
Tolerance of density g/cm3
+/-0.06
+/-0.05
Carbon content >/= %
98/99
99.5
Tensile strength >/= Mpa
3~20
5~25
Compressibility >/= %
30
30
Recovery >=/ %
15
15
Sulphur content </= %
1200
700
Chlorine content </= %
50
25
Stress relaxation rate %
10
10
Lgnition loss </= %
2.0
0.5
-240~+3500°C under non-oxidizing environment
PH: 0~14
Â
Dimensions
Item
Sheets
Density g/cm3
1.0
Length
500, 1000, 1500mm
Width mm
1000, 1500, 2000
Thickness mm
1.5~3.0
 Any questions,please don't hesitate to contact us.
Â
The beams are mounted on the machine's creel and are loaded with warp yarns. As the machine operates, the beams rotate, and the yarns are drawn through the needles and knitted into a fabric. The speed and tension of the beams are carefully controlled to ensure that the yarns are fed into the machine at a consistent rate, resulting in a uniform and high-quality fabric.
Different types of beams are used for different types of warp knitting machines. For example, a warp knitting machine used for producing lace fabrics may require smaller and lighter beams, while a machine used for producing heavy-duty fabrics may require larger and heavier beams.
In addition to holding the warp yarns, the beams may also be equipped with sensors and other devices to monitor and control the tension and speed of the yarns. This helps to ensure that the fabric is produced to the desired specifications and that the machine operates efficiently and reliably.
Reinforced-Graphite-Compound-Sheet-with-Tanged-Metallic
Model NO.: SUNWELL B203
Certificate: Dnv ISO9001,SGS
Trademark: Sunwell
Transport Package: Wooden Case
Specification: according your request
Origin: Ningbo
SUNWELL B203