Description For Stainless
Steel Wire Mesh Filter Tube
Product Name: wire
mesh filter tube ,cylinder filter tube
Structure: combined
of woven wire mesh and flange, single layer and multi-layer
Material : woven
wire mesh, metal Perforated Sheet ,expanded metal mesh
Production Technology:
welded by Stainless Steel Wire Mesh
Features :the
surface looks bright and smooth, corrosion resistance, durable
Working principle:
remove a small amount of impurities in the filter medium, which can ensure the
normal operation of the equipment and clean air. When the fluid passes through
the filter cylinder with a certain accuracy, the impurities are blocked, and
the clean flow through the filter cylinder, in order to achieve the clean state
required by our production.
The applications
of wire mesh filter tube
1, For some fine
particles, the liquid has good filtration, large flow per unit area, can be
used repeatedly after cleaning.
2, It is a
detachable cylindrical device, enclosed at the top and bottom, surrounded by a
filter medium, belonging to deep filtration.
3,The solid
particles in the suspension are smaller than the aperture of the filter, which
is suitable for the occasions where the particles in the suspension are very
small and the content is small.
4, Acid and alkali
resistance, corrosion resistance, not easy to damage, can be used repeatedly
after cleaning.
Wire Mesh Filter Tube,Stainless Steel Mesh Tube,Mesh Filters,Wire Mesh Tube Suzhou Haoxiang Screen Stencil Products Co.,Ltd , https://www.haoxiangwiremesh.com
Flange connection valve installation
1. Valve and piping flange surface should be no damage, scratches, etc., and keep clean. Especially when using metal washers, the notch of the flange should be matched with the washer, and the research should be done with red lead to ensure the sealed condition is good. 2. Piping on the flange surface and the pipe centerline vertical and flange bolt hole error should be within the allowable value range. Valve and piping center line to be consistent, in the installation. 3. When connecting the two flanges, first of all, make the flange sealing surface and the gasket evenly pressed, thus ensuring that the flange is connected by the same bolt stress. 4. When tightening the bolts, use a wrench that matches the nut. When using hydraulic and pneumatic tools for tightening, be careful not to exceed the specified torque. 5 flange fastening to avoid uneven force, should be in accordance with the symmetry, the direction of reciprocal screwed together. 6. After flange installation, make sure all bolts and nuts are tightened evenly. 7. Bolts, nuts, the material must meet the regulations. After tightening, the bolt head should be exposed from the nut two pitch appropriate. 8. Bolt and nut tightening, in order to prevent the vibration caused by the loose, use gaskets. In order to avoid high temperature adhesion between the threads, threaded parts should be coated with anti-adhesive installation. 9. For high-temperature valves above 300 ℃, after the temperature rises, the flange connection bolts, valve cover fastening bolts, pressure seals and packing gland bolts must be tightened again. 10. Low-temperature valve at the time of installation is in the state of atmospheric temperature, due to the formation of temperature, flanges, gaskets, bolts and nuts shrink, and because these parts of the material is not the same, the respective linear expansion coefficient Different, forming a very easy to leak environmental conditions. From this objective situation, when fastening the bolts at atmospheric temperature, the moment that takes into account the shrinkage of the various components at low temperatures must be used. More Keywords Search: Valve