Welded Bed Plate For Flanges Of Ship Pipe The flange welded single-sided seat plate is mainly installed on the top, side wall and bottom of the cabin or cabinet as the entrance and exit of the cabin or cabinet. Valves, accessories or pipes can be installed directly on the single-sided seat plate.
Flange welded single-sided seat plate is suitable for seawater, fresh water, oil, air and steam pipelines below 300 °C. The commonly used nominal diameter is 15~150 mm, and the nominal pressure is lower than 1.6 MPa. The shape of the single-sided seat plate is similar to the corresponding lap-welded Steel Flange.
Flange welded double-sided seat plates are generally used when pipelines pass through decks and tanks, and the two sides of the seat plate are respectively connected to valves, accessories or pipes. Welded Bed Plate For Flanges Of Ship Pipe,Flanges Of Ship Pipe Welded Bed Plate,Welding Base Plate Flange Of Ship Pipe,Ship Pipe Welding Base Plate Flange Fuyuan Marine Accessories Co., Ltd , https://www.fuyuanmarineparts.com
product description:
C02 laser marking machine uses imported RF laser with high-speed galvanometer scanning system, by adjusting the laser output power to control the marking of the depth, the product surface marking, engraving, cutting, for small format static processing, long Time to work continuously. It can meet the requirements of high-speed marking of plastic products, wood products, paper, leather, fabric, plexiglass, epoxy resin, acrylic and other industries. The machine is very fast, the effect is fine, no consumables, no pollution and no pollution. , Engraving requirements.
Technical Parameters:
Maximum laser power Biggest Laser power: 10W / 20W / 30W / 50W / 60W / 100W
Laser wavelength: 10.64μm
Sculpture range: 0-100mm, 0-200mm, 0-300mm or order Or ordering
Engraving line speed Engraving line speed: ≤ 7000mm / s
Laser life:> 20000 hours hours (RF tube)
                              <1000 hours hours (glass tube)
Power supply: 220V / single phase (single-phase) / 50Hz
Optional accessories: All kinds of accessories
Production line paging machine Smoke suppressors synchronizer flat field focus lens all kinds of production line paging machine, etc
Â
Applicable materials and industry applications
Suitable for bamboo, coconut shell, paper, plexiglass, PCB board, acrylic, rubber, marble, granite, jade, crystal, leather, fabric and so on the vast majority of non-metallic materials. Used in craft gifts, advertising decoration, toys, electronic appliances, clothing, medicine, food, paper products and other industries.
Dimension of fiber laser marking machine:
 
Spare parts:
Samples:
Certificates:
Â
product description:
C02 laser marking machine uses imported RF laser with high-speed galvanometer scanning system, by adjusting the laser output power to control the marking of the depth, the product surface marking, engraving, cutting, for small format static processing, long Time to work continuously. It can meet the requirements of high-speed marking of plastic products, wood products, paper, leather, fabric, plexiglass, epoxy resin, acrylic and other industries. The machine is very fast, the effect is fine, no consumables, no pollution and no pollution. , Engraving requirements.
Technical Parameters:
Maximum laser power Biggest Laser power: 10W / 20W / 30W / 50W / 60W / 100W
Laser wavelength: 10.64μm
Sculpture range: 0-100mm, 0-200mm, 0-300mm or order Or ordering
Engraving line speed Engraving line speed: ≤ 7000mm / s
Laser life:> 20000 hours hours (RF tube)
                              <1000 hours hours (glass tube)
Power supply: 220V / single phase (single-phase) / 50Hz
Optional accessories: All kinds of accessories
Production line paging machine Smoke suppressors synchronizer flat field focus lens all kinds of production line paging machine, etc
Â
Applicable materials and industry applications
Suitable for bamboo, coconut shell, paper, plexiglass, PCB board, acrylic, rubber, marble, granite, jade, crystal, leather, fabric and so on the vast majority of non-metallic materials. Used in craft gifts, advertising decoration, toys, electronic appliances, clothing, medicine, food, paper products and other industries.
Dimension of fiber laser marking machine:
Â
Spare parts:
Samples:
Certificates:
Â
Compared with the single-sided seat plate, the double-sided seat plate has an extra shoulder and double-sided mounting stud bolts. The outer diameter of the shoulder is 10~20 mm larger than that of the corresponding flange, and the thickness of the shoulder is 6~12 mm.
Its scope of application and other structural dimensions are basically the same as those of the single-sided seat plate.
The manufacturing and installation methods of the flange-welded double-sided seat plate are basically the same as the single-sided seat plate, but when the screw holes are drawn, the positions of the upper and lower screw holes of the seat plate must be staggered from each other and must not overlap; deck or bulkhead The diameter of the hole on the top is 2~3 mm larger than the diameter of the seat plate.
CO2 Laser Marking Machine Manufacturer
Model NO.: LS-P2000
Type: YAG Laser Marking Machine
Marking Method: Scanning Marking
Transport Package: Wooden Box
Specification: 66*78*168cm
Origin: China
HS Code: 8486204900
Model NO.: LS-P2000
Type: YAG Laser Marking Machine
Marking Method: Scanning Marking
Transport Package: Wooden Box
Specification: 66*78*168cm
Origin: China
HS Code: 8486204900
15w 20w 30w 50w 70w 100w Co2 laser marking machine