Fog day driving, visibility is very low, easy to drive accident, Chu Sheng garbage truck technical commissioner today to share the driving skills

Let's follow friends

1. To horn sound

Friends in the fog should diligently press the horn to voice their position

2. Be sure to remember to turn on the headlights and fog lights

When fog visibility is low, all kinds of lights, such as fog lights, width lights, and double flash lights on the car, must be turned on (except for high beam lights) to remind the front and rear vehicles to avoid evading the lights.

3. Do not overtake the fog

It is forbidden to overtake the moving vehicle in foggy weather. If you find that the vehicle in front of you is driving on the right side, do not blindly walk around. Be sure to consider whether or not this vehicle is facing the opposite side of the vehicle. When you exceed the vehicle parked on the roadside, make sure that it has no intention of starting and if you do not come to the opposite side, you must make a horn in due course and bypass the low speed from the left side.

4 must pay attention to control the speed

When driving a dump truck in the fog, it is necessary to control the speed.

5. Pay attention to adjust the distance at any time

In foggy weather, the visibility is low, and the vehicle distance must be adjusted at any time according to the size and visibility of the fog, so as to ensure that there is a good time for emergency treatment.

6. To clean the window from time to time

Condensation of water vapor on the windshield of the fog can damage the sight of the owner. Remember to use the wiper to remove water vapor and improve the visibility of the line of sight.

7. Garbage trucks do not drive as much as possible

Foggy days have a poor sight line. When driving, if it is a one-way three-lane road, it would be better to be in the middle of the road and not to drive on both sides of the road. Because visibility is low at this time, it is not easy to handle what happens on both sides of the road.

8. Emergency braking needs careful

In fog, emergency braking will make it impossible for the rear vehicle to determine the distance and cause a rear-end collision.

PCB Cutting Machine

This type of SF-706 machine have to keep PCB board,the circular blade is moving.It is suitable for Special height for ultra high component can be 70mm.

This type of SF-701machine through adjust the height of track manually and control At 0.01 mm to solve the problem of V-CUT depth. Accept made to order super high components on the PC board such as power supply.The highest for 400mm is also accepted to customize.

The type of SF-705 v notch PCBA Cutting Machine which is suitable for Thickness of the to-be-cut base plate: 0.5-2.0mm, max. length of 300mm PC plate. Then Processing V-PCD plate, aluminum plate and CUT plate, etc.The using way is Controlled by electric pedal or pneumatic pedal, hoe knife plate splitting is completed by the motion of air cylinder.

The type of SF-716 machine is used for visual PCB depanel.

Visual Platform Desktop Separator,V-cut PCB Cut Depaneling Machine,PCB V-cut Cutting Machine

SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com