Automatic CNC lathe than ordinary machine tools in what is better?
First, the processing accuracy is constantly improving. Because the automatic CNC lathe is installed through the intelligent program to process the operation, so that the accuracy of the gatekeeper will be more rigorous, so that the quality and quality of processed products will have a significant improvement. Therefore, the process of promoting this in the market to bring the customer's choice is also more trustworthy. Cnc Lathes,Cnc Flat Bed Lathe,Heavy Duty Vertical Lathes,Cnc Flat Bed Lathe Machines Ningbo Yien Machinery Co., Ltd , https://www.yiencnc.com
TEKORO Catalytic Converter Cleaner can effectively solve the problems of catalytic converters such as sulfur-phosphorus compound blockage, poor exhaust, power loss, increased fuel consumption, and shortened life. At the same time, it can be used to clear the carbon deposition and sludge in combustion chamber, intake valve, fuel injectors and other parts. It will reduce exhaust emissions and fuel consumption, improve power performance, restore the exhaust purification function of catalytic converters and extend its life.
Usage:
Precautions:
Second, the applicable processing application scenarios will become more and more extensive. With a more prominent level of fully automatic technology, then in the different processing application scenarios can be affirmed. Therefore, when comparing, the performance advantages in all aspects will be more and more diversified, and the choice brought to the customer will be more assured. Only through the comparison of processing application scenarios, the advantages will be more prominent.
Third, the processing efficiency continues to improve, can be repeatedly processed many times, to ensure that the quality in all aspects will be higher and higher. This is also the fully automatic CNC lathe in the design of all should go to understand the aspects. As in the process of comparing ordinary machine tools, it is found that the technical performance in all aspects will be different, and the choice for customers will be different, which can be seen in the analysis of the technical advantages and characteristics.
Catalytic Convert Cleaner
1. Open the bottle cap of cleaning agent first, and screw on the dedicated tool;
2. Disassemble the vacuum tube of the vehicle, connect to the tube of cleaning tool, close the control valve in the cleaning tool (left: open, right: close), start the engine, open the control valve and clean at idle speed;
3. It is easy to cause black smoke or flame if the flow is too high while cleaning; please adjust the flow appropriately;
4. Pay attention to the running mileage while cleaning; if the mileage is less than 5,000km, conduct routine catalytic converter cleaning; if more than 5,000km, please clean at idle speed;
5. Cleaning time: clean 25 minutes for vehicles with displacement lower than 1.6L, and clean 40 minutes if the displacement is higher than 1.6L;
6. Do not clean in the following situations:
catalytic converter sintering or lead poisoning; serious blockage in catalytic converter; carburetor is modified to catalytic converter; the engine is burning engine oil.
Advice: After cleaning, the vehicle needs to run about 5 km to discharge the waste.
1. Use together with dedicated cleaning equipment or special tool;
2. For specific usage, refer to the instructions for cleaning equipment or special tool;
3. Avoid splashing the product into eyes; in case of accidents, wash with clean water immediately and go to the hospital for treatment;
4. Store in a cool and dry place, and keep it away from children.