Casting
Thickening Sprue Tube Mainly applied to lost foam casting, mold casting, the
traditional sand mold casting, coated sand casting, casting methods, to improve
castings quality, reduce scrap, improve the quality of reclaimed sand, reduce
the work intensity, etc. In China belongs to the first, it will be casting
sprue tube of a revolution.
The main
advantages:
1, light
weight, easy to operate. Paper tube runner weight is only 1/10 of the same type
ceramic tube runner weight, convenient operation, reduce labor intensity of
more than 70%.
2, easy
to cut, no pollution. Little dust paper knife cutting, cutting, greatly improve
the intensity of labor and the environment.
3, good
sealing, reduce risk into the sand. Interface using the socket type, not easy
dislocation, interface closely, to avoid the sand into the sprue, effectively
reduce the casting sand inclusion defects.
4, not
with liquid metal. When pouring not crack, not adhesion, slag resistance,
erosion resistance. Refractoriness is as high as 1460 ℃ above, solved the sprue adhesion
problem for a long time.
5, the
intensity is high, is not easy to damage. Room temperature compressive strength
of 18 mpa, after repeated experiments, dropped below 1.5 meters high, will not
damage.
6, for
the castings without increasing carbon, carburizing. Ensure the casting
material and performance is not changed.
7 and
improves the quality of reclaimed sand, reduce equipment wear and tear. Paper
after casting sprue tube blank, carbide waste few, about 1/20 of the ceramic
tube runner, and easy to peel, easy clean, avoid the pollution of gating pieces
of sand, and solved the ceramic gating pieces of sand reclamation equipment
wear and blocking sieve, prolonging the service life of equipment.
8, energy conservation and environmental protection. Paper
sprue tube with organic fiber and refractory materials such as waste paper as
raw materials. Using process does not produce pollution, waste can biodegrade,
is a typical green environmental protection, energy-saving products.
Casting Thickening Sprue Tube,Thick-Walled Ceramic Pipe For Casting,Foundry Ceramic Pipe In Thickening,Ceramic Thickening Pipe Baoji Huaguang Casting Material Science and Technology Co.,Ltd , http://www.bjhgcasting.com
1 Introduction
The pump is with peripheral impeller containing numerous radial blades in its edge. Water is threw outwards by centrfugal motion caused by the impeller. Then the water rotates with the impeller, generate high pressure. These pumps have a compact size and are very economical. They have various appearances and motor shells to the different operating requirements.
2 Construction
Pump Body: Cast Iron/Stainless Steel/Brass
Front Cover: Cast Iron/Cast Iron with brass insert / Aluminum / Brass
Impeller: Brass/Aluminum/PPO
Mechanical Seal: Carbon/Ceramic/Stainless Steel
Motor Housing: Alloy Aluminum
Shaft: Carbon Steel/Stainless Steel/High Frequency Wedding Shaft
Insulation: Class B / Class F
Protection: IP44 / IP54
Cooling: External Ventilation
With thermal overload protector in single phase motor
( the normal power standard is 220V 50Hz single phase.
There phase 220V/380V/50Hz, 220V/440V/60Hz,
Single phase 230V, 240V, 127V, 110V115V/60Hz model are available in request. )
FAQ:
Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C. DP and OA payment is also acceptable.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicate do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc
After Sales:
1). We are very glad that customer give us some suggestion for price and products.
2). If any question, please let us know it in the first by E-mail or Telephone. We can deal with them for you in time.
3). We will send many news styles in every week to our old customers.
We promise to:
Offer our customers the lowest prices.
Streamline the buying and paying processes.
Deliver goods to our customers all over the world with speed and precision.
Ensure the excellent quality of our products.
Should you have any question or requirement, pls feel free to contact us. Sincerely hope to build
A long-term friendly cooperation relationship with you! ! !
Your ODM/OEM is welcome, differnet color and color package is acceptable.
If you need more about this series of water pump, Please don't hesitate to contact me for further details.
NO.
TYPE
POWER
MAX.FLOW
MAX.HEAD
INLET/OUTLET
MAX.SUCT
N.W
PACKING DIMENSION
(Kw)
(Hp)
(L/min)
(m)
(Inch)
(m)
(K.g)
(mm)
A
PS-126
0.37
0.5
35
40
1"*1"
9
9.2
295*170*245
B
PS-130
0.37
0. 5
35
40
1"*1"
9
9.5
295*200*290
C
PS-150
0.55
0.75
60
40
1"*1"
9
15
330*205*285
1 Introduction
The pump is with peripheral impeller containing numerous radial blades in its edge. Water is threw outwards by centrfugal motion caused by the impeller. Then the water rotates with the impeller, generate high pressure. These pumps have a compact size and are very economical. They have various appearances and motor shells to the different operating requirements.
2 Construction
Pump Body: Cast Iron/Stainless Steel/Brass
Front Cover: Cast Iron/Cast Iron with brass insert / Aluminum / Brass
Impeller: Brass/Aluminum/PPO
Mechanical Seal: Carbon/Ceramic/Stainless Steel
Motor Housing: Alloy Aluminum
Shaft: Carbon Steel/Stainless Steel/High Frequency Wedding Shaft
Insulation: Class B / Class F
Protection: IP44 / IP54
Cooling: External Ventilation
With thermal overload protector in single phase motor
( the normal power standard is 220V 50Hz single phase.
There phase 220V/380V/50Hz, 220V/440V/60Hz,
Single phase 230V, 240V, 127V, 110V115V/60Hz model are available in request. )
FAQ:
Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C. DP and OA payment is also acceptable.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicate do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc
After Sales:
1). We are very glad that customer give us some suggestion for price and products.
2). If any question, please let us know it in the first by E-mail or Telephone. We can deal with them for you in time.
3). We will send many news styles in every week to our old customers.
We promise to:
Offer our customers the lowest prices.
Streamline the buying and paying processes.
Deliver goods to our customers all over the world with speed and precision.
Ensure the excellent quality of our products.
Should you have any question or requirement, pls feel free to contact us. Sincerely hope to build
A long-term friendly cooperation relationship with you! ! !
Your ODM/OEM is welcome, differnet color and color package is acceptable.
If you need more about this series of water pump, Please don't hesitate to contact me for further details.
NO.
TYPE
POWER
MAX.FLOW
MAX.HEAD
INLET/OUTLET
MAX.SUCT
N.W
PACKING DIMENSION
(Kw)
(Hp)
(L/min)
(m)
(Inch)
(m)
(K.g)
(mm)
A
PS-126
0.37
0.5
35
40
1"*1"
9
9.2
295*170*245
B
PS-130
0.37
0. 5
35
40
1"*1"
9
9.5
295*200*290
C
PS-150
0.55
0.75
60
40
1"*1"
9
15
330*205*285
Best Mini Vacuum Pressure Pump PS130
Model NO.: PS130 Auto
Motor Housing: Aluminum
Insulation: Class B/F
Certification: CE ISO9001:2008
Colour: as Your Request
Trademark: DACHENG
Specification: CE, ISO9001: 2008
Origin: Ningde
HS Code: 8413709990
Model NO.: PS130 Auto
Motor Housing: Aluminum
Insulation: Class B/F
Certification: CE ISO9001:2008
Colour: as Your Request
Trademark: DACHENG
Specification: CE, ISO9001: 2008
Origin: Ningde
HS Code: 8413709990
2L tank ps130 peripheral electric water pump